Farmall & IHC Tractors Discussion Board |
Re: engine trouble???
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Les on May 22, 2001 at 12:16:44 from (206.155.220.71):
In Reply to: engine trouble??? posted by SMTA Man on May 21, 2001 at 20:29:03:
Perhaps you can get access to a deferential pressure gauge. This tool allows you supply a known pressure from a compressor to the cylinder which is displayed on one gauge a second gauge measures the difference between input pressure (80 PSI for aircraft engines) and the pressure that the cylinder is capable of maintaining. The difference between input and cylinder pressure allows you to compare the cylinders. On aircraft engines the allowable difference is most often 20 PSI maximum with an average diffence of 10PSI for all cylinders. This test requires that the piston in the cylinder being checked be at TDC. A TDC indicator is handy. Any pressure being lost will be past the piston rings or valve seats,or. You will be able to hear which direction escaping air is going. Sorry for the lengthy post. Les
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|