Farmall & IHC Tractors Discussion Board |
Re: torque specs for IH656 Hydro?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by JH on May 10, 2001 at 09:25:44 from (198.26.130.36):
In Reply to: torque specs for IH656 Hydro? posted by GSS on May 07, 2001 at 12:31:53:
From my service manual on this tractor, #GSS-1397, I find no torque values given for those applications. However, in that same manual there is a Standard Torque Data chart for nuts and bolts. The L shape cover you speak of, on my tractor is installed with IH type 2 bolt, which is a SAE grade 5 bolt. It has a 9/16 hex head and 3/8" shank at 16 tpi. Torque those bolts at 33 to 37 ft lbs. Same with your Hydro trans filter cover, locate on the right side of the housing just below the brake pedals. For the drawbar support housing, they are also IH type 2 bolts, or a SAE grade 5 bolt, with a 15/16 hex head and 5/8" shank at 11 tpi. Those torque up at 160 min-180 max ft lbs. Type 1 IH bolts are SAE grade 1 or 2. Type 2 IH bolts have 3 lines on the head and are SAE grade 5. Type 3 IH bolts have 4 radial lines on the bolt head and are SAE grade 6. Type 4 IH bolts have 6 radial lines on the bolt head and are SAE grade 8. Hope this helps. Good luck.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|