Farmall & IHC Tractors Discussion Board |
Re: 2 way hydraulic compatability
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by brianh on April 12, 2001 at 06:29:13 from (205.188.199.151):
In Reply to: 2 way hydraulic compatability posted by Dick Davis on April 12, 2001 at 02:39:13:
I retrofitted my MD with a live pump and added a two-way valve. I have an old Freeman loader with one-way cylinders, so I added a T in the return line back to the tank from the valve, and then put a short flexible hose with a male hydraulic coupler on it. When I use the loader, I plug the line to the loader in one port from the valve, and this additional hose in the other, so it takes the return fluid from the cylinder back to the tank. Then when I want to run something that is two-way, I can disconnect that return hose and use a two-way cylinder like normal. If you have any other questions, just e-mail me directly. Brian
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|