Farmall & IHC Tractors Discussion Board |
Re: H hyd. lift.
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Haas on March 24, 2001 at 12:36:42 from (129.37.117.123):
In Reply to: H hyd. lift. posted by Whiskers on March 24, 2001 at 09:23:01:
You can put a one way restrictor in the hydraulic line. It will not restrict the flow to the cylinder, but the flow rate back out of the cylinder will be adjustable. You can get one from Northern Tool. I suppose a place like Tractor Supply might have them too. It's real hard to let the lift all down slow with out some kind or restricter. Another option is to get a spool valve that will allow you to control the cylinder as a two way cylinder instead of one way. That is going to be a lot more expensive and will require quite a bit of piping and hose. You have to run the return from the spool valve back to the fill pipe on the lift all. In addition, there would be a hose from the liftall outlet to the spool valve and two hoses from the spool valve, one to each end of the cylinder. With the spool valve system, you have to lock the lift all in the lift position when ever you are using the spool valve.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|