Farmall & IHC Tractors Discussion Board |
Re: MD Wire Harness question
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Haas on February 26, 2001 at 16:27:10 from (129.37.117.65):
In Reply to: MD Wire Harness question posted by Ike in NC on February 25, 2001 at 17:11:26:
Ike, when I said someone had moved your cutout relay(or regulator), I was going by what the IH dealer told me. Maybe he did not know what he was talking about. On my 1947 MD, the regulator is also located at the front mounted on left side of the radiator. If you want to stick with original and use the cutout relay, then I guess you will need to get a wiring harness. However, things will work a lot better if you will forget about the cutout relay and get yourself a regulator. You don't have to worry about setting the charge rate and so on, the regulator just takes care of it and you only need one wire from the regulator to the switch box that is on the steering column. A regulator will cost around $30.
Follow Ups:
Home
| Forums
Today's Featured Article -
New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|