|
Farmall & IHC Tractors Discussion Board |
Re: Re: Give suggestions on Super A steering fixes please!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Al on January 30, 2001 at 17:40:14 from (63.175.62.97):
In Reply to: Re: Give suggestions on Super A steering fixes please! posted by Haas on January 30, 2001 at 15:09:03:
The steering box is a weak area on the Super A. If you have a good machine shop close by, getting it in a-1 shape will be no problem. Take apart, replace the bearings and the bushings. You probably have wear where the arm under the box attaches to the sector shaft, and possibly wear on the shaft where the sector gear attaches. Get the machine shop to carefully mic. the sector shaft, steering arm, and the gear, build up if necessary. (Be sure to check where the grease seal rides on the shaft too, this is the only thing I didn't have checked and mine leaks a bit. You can get a new gear but it's EXPENSIVE!! I think you can get all the parts from caseIH, IF you update to the automotive style tie rods. If you keep the ball and socket tie rods, you should be able to find good used ones in the boneyards. (This is what I have done, the automotive ones don't look right.) The inside of the gearbox is pretty much the same on either style tie-rod.
This is a quick-and-dirty explanation, if you need more help feel free to email me. I've done this job on my Super A with fair success and I'm a lousy mechanic! Al
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
