Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

D-17 Series 1 tranny problem

Welcome Guest, Log in or Register
Author 
Ryan

06-27-2000 12:32:15




Report to Moderator

Okay guys, here is the challenge. Have the tractor lined up to attach loader when it won't go into first. So put it in third, then it won't come out of third.

Get it up to shed and pull plate on top of torque tube and can't get the plate & shifter to come off. See inside that a shift fork rod (where it is attached to inside of the plate) is broken and that the fork is slipped of to the side of the torque tube.

After reading the manual I now know that the tranny must be in neutral to pull the shifter plate off. . .How do I get it into neutral when it is stuck in gear? Any help appreciated.

D. Ryan Mull
Goodland, IN

[Log in to Reply]   [No Email]
anthony wills

04-28-2006 11:06:15




Report to Moderator
 Re: D-17 Series 1 tranny problem in reply to Ryan, 06-27-2000 12:32:15  

what where they like to run



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy