TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Talk Discussion Forum

International 826

Welcome Guest, Log in or Register

Author

Wayne Rowland

03-09-2008 15:48:43

Report to Moderator

How big of chisel plow canan 826 pull? Witch type of chissel plow is preferd 3 point or the pull king?

[Log in to Reply] [No Email]

Dan-IA

03-10-2008 08:06:08

Report to Moderator

Re: International 826 in reply to Wayne Rowland, 03-09-2008 15:48:43

I keep sayin' it, you keep ignoring me. Is your 826 a hydro?

[Log in to Reply] [No Email]

fixerupper

03-09-2008 19:25:11

Report to Moderator

Re: International 826 in reply to Wayne Rowland, 03-09-2008 15:48:43

Is it a chisel plow or V ripper? We probably have different names for them in different locales, but around here a chisel plow does it's work at the 7" to 9" depth, where a V ripper does it's best at 12" down to however deep you want to go without ripping up field tile.

I used to pull a 3PH seven shank chisel plow with the 1086, and I could pull it anywhere I wanted to at 8". Then I went to a five shank 3PH V ripper and found out the 1086 wasn't enough tractor in some of the tougher soils. It would just plain anchor the tractor to the ground and I'd have to back up to get it out. It was very unforgiving and hard on the tractor.

Don't know what kind of soil you are working with, but I would think you could pull a seven shank 3PH chisel plow at 8"-9" but you won't win any races. To pull a pull type chisel that will cover your dual tracks you might have to weight the tractor down pretty good.Jim

[Log in to Reply] [No Email]

Goose

03-09-2008 17:56:29

Report to Moderator

Re: International 826 in reply to Wayne Rowland, 03-09-2008 15:48:43

I always heard a rule of thumb was 10 hp per shank, and that was pretty much my experience.

I pulled an eleven shank with an 856 and a 14 shank with a 1086.

[Log in to Reply] [No Email]

rader

03-09-2008 16:56:09

Report to Moderator

Re: International 826 in reply to Wayne Rowland, 03-09-2008 15:48:43

It always seems like mounted implements pull better (more traction) but are harder on the tractor.

[Log in to Reply] [No Email]

rrlund

03-09-2008 16:31:20

Report to Moderator

Re: International 826 in reply to Wayne Rowland, 03-09-2008 15:48:43

With dual wheels,I wouldn't go more than a 7 shank,to get it in the ground where it needs to be to do a good job. If you have enough weight in front to handle it,I prefer a 3 point myself. It'll get you more traction.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy