Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

cam bearings for a Case 810B

Welcome Guest, Log in or Register
Author 
Gary Steele

03-04-2008 18:38:52




Report to Moderator

The Physical size is 2.250 od
2.120 ID

4 bearings

My 1992 Michigan 77 book says a cam set SH-308S would be the correct set for the size of cam that is in the block

I have worked with parts houses accumalating all the liners pistons valves etc for a complete rebuid but the book keeps coming up with cam bearings that won,t fit. cam shaft dia.- 2.122

thanks to all gary gary900@centurytel.net

[Log in to Reply]   [No Email]
george md

03-04-2008 20:12:53




Report to Moderator
 Re: cam bearings for a Case 810B in reply to Gary Steele, 03-04-2008 18:38:52  

Gary, The early case engines had smaller dia cams, there are no more bearing sets to be had. I have the cure for your problem on the shelf as I have the same problem with the J series continental engines.

I'll send you an email thru yt .

george



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy