Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Carburator problems settings..????

Welcome Guest, Log in or Register
Author 
Larry59

02-09-2008 17:41:52




Report to Moderator

I have a 58 B-311 with 146 engine. Took carburator off and found no marking on the butterfly as same say might be. Found only on back side.. letters SK #687. First does this mean anything to anyone?
Second.. I did get a carb kit for it from auto parts store. But it contains no paper work other then a note says.. 2 needles..make sure which one is your size before installing. Also there is the little measurment stick to check or set the Floats. However , There is nothing to tell me what that measurement might be to read on stick. Any help... Kit was put out by , Walker Innovative Engine Management Solutions, #778-505 Been on internet looking can't find the settings I need. Also what is the settings on the adjustment screws?
Also don't tell me to go to the Case side... been there and got no answer. *S

[Log in to Reply]   [No Email]
Larry59

02-09-2008 18:41:43




Report to Moderator
 Re: Carburator problems settings..???? in reply to Larry59, 02-09-2008 17:41:52  
Go ahead and scan that for me rich..thanks .. sent email to on it and about Dodge getting fix for 400.00 for a dan fuel pump and labor ..



[Log in to Reply]  [No Email]
old

02-09-2008 18:14:40




Report to Moderator
 Re: Carburator problems settings..???? in reply to Larry59, 02-09-2008 17:41:52  
Larry, look in the box a little it better. A lot of times the instruction sheet sticks in the box under the inside box that has the parts in it. If you don't find it drop me an e-mail and I'll scan you a copy of it. I just walked out to my shop and have the sheet right here in the desk. Float setting is a 1/4 inch from the gasket surface to the float.

[Log in to Reply]  [No Email]
butterfly

02-09-2008 18:13:40




Report to Moderator
 Re: Carburator problems settings..???? in reply to Larry59, 02-09-2008 17:41:52  
butterfly and settings.BUTTERFLY



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy