Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Allis 'B' froze motor

Welcome Guest, Log in or Register
Author 
Steve Erickson

11-20-2007 02:42:23




Report to Moderator

This is my second 'B', I have had it just over a year. 2 owners ago it was completely gone through, may have had the engine rebuilt. I use it to move wood and snow (tripbucket). Last had it running in March. 2 weekends ago I tried to crank it, the crank moved about 1/2 inch, oh no!!! Since then I have put in PB Blaster, WD40 and ATF in the cyclinders, also tugged it with another tractor, didn't budge. It ran fine last time I used it, just ran it out of gas. In neutral the wheels turn. Could it be something besides rusted piston/cylinder?

[Log in to Reply]   [No Email]
Steve Erickson

11-21-2007 02:19:48




Report to Moderator
 Re: Allis 'B' froze motor in reply to Steve Erickson, 11-20-2007 02:42:23  
Thanks guys, guess I'll empty my can of PB Blaster and get some of that Kroil. I do have a snowblower, but moving wood is gonna suk. This is Minnesota, so not much time left. The way it's stuck I'm betting on pulling the heads next spring/summer, just hope I don't break a bolt.



[Log in to Reply]  [No Email]
notadeere

11-20-2007 15:28:13




Report to Moderator
 Re: Allis 'B' froze motor in reply to Steve Erickson, 11-20-2007 02:42:23  
ATF is way to thick, use the pbblaster or even better if u can afford it i use KROIL good stuff higher cost but good & pull your plugs soak it up then pull your starter & use a bar back & forth off the flywheel dont expect it to come over night soak it a few days & work with it if not that bad u will be up & running in no time if its like anything i get its pull head & oil pan & beat out & cry...

[Log in to Reply]  [No Email]
old

11-20-2007 08:13:02




Report to Moderator
 Re: Allis 'B' froze motor in reply to Steve Erickson, 11-20-2007 02:42:23  
Pull all the plugs out and then try to turn it over. It could be locked up becuase one of the cylinders has fluid of some type in it. Since it did move a little I would try to turn it back wards and see if by doing so you could get it to spin a full tunr back wards. If you do then try the other way again and it may just free up

[Log in to Reply]  [No Email]
El Toro

11-20-2007 05:19:51




Report to Moderator
 Re: Allis 'B' froze motor in reply to Steve Erickson, 11-20-2007 02:42:23  
I would pull the head and see what the cylinders look like. I used a piece of 2X2 oak and a hammer and drove the rods & pistons out. It had set outside since day one from the looks of it.
Hal



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy