TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Talk Discussion Forum

It's Here!

Welcome Guest, Log in or Register

Author

Allan In NE

11-14-2007 10:27:51

Report to Moderator

Now, I ask ya,

What's not to like about a fine quality unit like this? Other than the fact that I couldn't get it to run (no engine)? :>)

Allan

third party image

[Log in to Reply] [No Email]

JoeBob/IN

11-15-2007 04:35:20

Report to Moderator

Re: It's Here! in reply to Allan In NE, 11-14-2007 10:27:51

Did you buy the complete combine including walkers and engine or are you still needing my engine unit. I have been busy and haven't been watching the board too closely. Should be wrapping up harvest soon so I can watch this F2 come to life again!

[Log in to Reply] [No Email]

Allan In NE

11-15-2007 04:45:06

Report to Moderator

Re: It's Here! in reply to JoeBob/IN, 11-15-2007 04:35:20

Hi Buddy!

Don't know for sure yet, what I'll need. :>)

Found a fella down south of you that had the exact twin to my machine. Was in the field doing corn, but that expensive curved windshield had gotten broken. He said it was cheaper for him to buy his neighbor's combine than to buy that windshield, so he's parting out the original machine.

Bought the total engine assembly area, the four "corn-soybean special" walkers and some other odds and ends that I knew I'd need.

Haven't talked to him for a few days. Last I knew he had the engine out and was working on those "knuckle-bleeding" walkers. :>)

I'll sure let ya know when I find out.

Allan

[Log in to Reply] [No Email]

Moline_guy

11-14-2007 17:38:31

Report to Moderator

Re: It's Here! in reply to Allan In NE, 11-14-2007 10:27:51

Looks like it has a wide stance, is that so it can straddle four 30" rows? Always liked the look of those gleaners, neigbors ran a G for many years and then a L2, hope you can figure out a way to get that silver shine back after all the mechanical work is done, take care.

[Log in to Reply] [No Email]

Allan In NE

11-14-2007 19:49:28

Report to Moderator

Re: It's Here! in reply to Moline_guy, 11-14-2007 17:38:31

Yeah,

How does that play out? Standard tread stradles 2 38"s and with the extensions, it stradles 4 30"s. Quite a difference anyhoo. :>)

Allan

third party image

[Log in to Reply] [No Email]

maplehillfrm,pat

11-14-2007 17:21:09

Report to Moderator

Re: It's Here! in reply to Allan In NE, 11-14-2007 10:27:51

thats sweet lookin allen, how do you ever find the time to do all the projects you have going on??? I guess the most important question is how do you manage to get them all done and looking so good,, good luck with this one , pat

[Log in to Reply] [No Email]

Allan In NE

11-14-2007 17:29:43

Report to Moderator

Re: It's Here! in reply to maplehillfrm,pat, 11-14-2007 17:21:09

Hi Pat,

This morning while I was waiting on the semi, I sat down and added up what I've already spent on this old piece of iron since it was brand new.

Won't repeat it here, but gotta tell ya, it's a shocker. :>(

Gotta stay busy or I go depressed. Just keep puttin' one foot in front of the other. :>)

Allan

[Log in to Reply] [No Email]

PJBROWN VT

11-14-2007 17:00:55

Report to Moderator

Re: It's Here! in reply to Allan In NE, 11-14-2007 10:27:51

So when does the corn planter come??

[Log in to Reply] [No Email]

Allan In NE

11-14-2007 17:14:17

Report to Moderator

Re: It's Here! in reply to PJBROWN VT, 11-14-2007 17:00:55

Planter and cultivator were some of the first implements I bought.

Had 'em tuned, overhauled and ready for the field long, long ago. :>)

Allan

[Log in to Reply] [No Email]

37 chief

11-14-2007 12:31:17

Report to Moderator

Re: It's Here! in reply to Allan In NE, 11-14-2007 10:27:51

Allan, that looks like it will be a good winter project. Be sure to keep us posted on the progress. Stan

[Log in to Reply] [No Email]

Retento

11-14-2007 11:27:20

Report to Moderator

Re: It's Here! in reply to Allan In NE, 11-14-2007 10:27:51

Slap you a small block Chevy up there, Guy near me had a Gleaner model ? with a 292 Chevrolet 6 cylinder and another bigger combine with a 350 V-8. They were gas hogs but they would forever more get the job done!! Both better engines than that thin AC DT-301, think they call it a 2900 series.

[Log in to Reply] [No Email]

Retento

11-14-2007 11:29:59

Report to Moderator

Re: It's Here! in reply to Retento, 11-14-2007 11:27:20

My mistake, I now see it's a F2, little 4 cylinder turbocharged 200cid diesel. 95 hp in this part of the world.

[Log in to Reply] [No Email]

Allan In NE

11-14-2007 11:43:34

Report to Moderator

Re: It's Here! in reply to Retento, 11-14-2007 11:29:59

No,

This is a '77 short-tail model. Takes the 6-cylinder 2800 diesel.

Motor/cradle/etc. should be on the way from Indiana shortly along with the walkers.

Allan

third party image

[Log in to Reply] [No Email]

migraine

11-14-2007 11:19:09

Report to Moderator

Re: It's Here! in reply to Allan In NE, 11-14-2007 10:27:51

Looks Good To all Gleaner guys I'm sure. Looks like we need one cab glass and maybe a few throat repairs but at least it rolls and has most of the shields. BIL and I are thinking of taking off for Havre Montana this weekend to look at an L2 and a header. He has a possible buyer for his F. But we are really looking for a 14 or so foot header not the 24' that the L2 has on it. Know of any small headers with pickup reels around? We really need pickup reel for what we are doing here. What parts are you looking for the ole girl as we will be looking at several gleaner used yards on the way and over in Mont. Can sure keep an eye out for your needs . Let me know. Also if you hear or know of anything that needs to be hauled from here going East we are looking for something to help with fuel costs. Thanks Migraine

[Log in to Reply] [No Email]

Allan In NE

11-14-2007 11:37:07

Report to Moderator

Re: It's Here! in reply to migraine, 11-14-2007 11:19:09

Boy!

I can't remember ever seeing anything smaller than an 18' around these parts. My F also came with a 13' pickup header, but it hailed from over at Sheridan Wyo.

All I can think of that I still need is the cooler for the Hydro. Core measures about 14" x 14" or so and is larger than the standard hydraulic cooler on the variable speed versions.

Should have everything else coming.

Thanks Pard,

Allan

[Log in to Reply] [No Email]

Walt Davies

11-14-2007 10:57:01

Report to Moderator

Re: It's Here! in reply to Allan In NE, 11-14-2007 10:27:51

Allen, even you never get it running again you can always sit in that fancy cab and pretend that you are working a big field. Liston to the radio to make feel right.
Walt

[Log in to Reply] [No Email]

Allan In NE

11-14-2007 11:03:36

Report to Moderator

Re: It's Here! in reply to Walt Davies, 11-14-2007 10:57:01

Gonna "try" to thresh wheat with it next summer.

Don't know if I'll make that deadline or not 'cause that ol' Sis sure needs a lot of fixin'. :>)

Allan

[Log in to Reply] [No Email]

in-too-deep

11-14-2007 10:35:29

Report to Moderator

Re: It's Here! in reply to Allan In NE, 11-14-2007 10:27:51

That's just great! I see a picture of it loaded, and a picture of it unloaded, but how in the world did you get it off the trailer? And ya know, I'm liking to looks of those Gleaners every time you post a picture...futuristic-looking I guess is a word I could use.

[Log in to Reply] [No Email]

Allan In NE

11-14-2007 10:41:38

Report to Moderator

Re: It's Here! in reply to in-too-deep, 11-14-2007 10:35:29

I took the hydro tractor and easily pulled on 'er with a log chain.

The driver held it back with tension on the winch hooked to her tow hook and we just eased it down off of the ramp.

Wow, have I ever bitten off a load! Guess I'll just start on it and come up for air when it's done. :>(

Allan

[Log in to Reply] [No Email]

CWL

11-14-2007 10:37:36

Report to Moderator

Re: It's Here! in reply to in-too-deep, 11-14-2007 10:35:29

Unloaded with "gravity" winch. :-)

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy