Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Ford sleeves

Welcome Guest, Log in or Register
Author 
Brian in LA

11-02-2007 16:44:52




Report to Moderator

Does anyone have or know of an easy way to get the sleeves out of a 172 cu in Ford tractor? These appear to be the originals or at least serviced by a Ford dealer since the rod bearings have FoMoCo and 9/58 stamped on them.

Thanks
Brian




[Log in to Reply]   [No Email]
glennster

11-02-2007 18:57:33




Report to Moderator
 Re: Ford sleeves in reply to Brian in LA, 11-02-2007 16:44:52  
heres a couple of mine, store bought one on left, home made on right, 7/8 all thread, big piece of steel, weld a couple nuts to hold it off the block, make the pucks on a lathe
third party image

[Log in to Reply]  [No Email]
El Toro

11-02-2007 17:02:37




Report to Moderator
 Re: Ford sleeves in reply to Brian in LA, 11-02-2007 16:44:52  
third party image

You probably will need a sleeve puller similar to
this one. Hal
PS: You may be able to borrow one from a Ford dealer if you buy the parts from them.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy