Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

idiot light stays on

Welcome Guest, Log in or Register
Author 
rkoronka

11-02-2007 12:30:52




Report to Moderator

I have a 2510 jd tractor and the idiot light stays on. The belt is tight and the alt. shop checked the alt and said it was fine. The wires are hooked up top wire on clip is on the key switch when key is hot. the bottom wire and the wire on back of alt are tide together and go to the starter bolt on the silnoid.Help on this would be many thanks.




[Log in to Reply]   [No Email]
RustyFarmall

11-02-2007 12:54:51




Report to Moderator
 Re: idiot light stays on in reply to rkoronka, 11-02-2007 12:30:52  
An alternator has got to have 12 volts to it to "excite" the fields before it can generate any electricity. Somewhere in your wiring harness is a loose or dirty connection, or a broken wire.



[Log in to Reply]  [No Email]
Jon Hagen

11-02-2007 15:31:16




Report to Moderator
 Re: idiot light stays on in reply to RustyFarmall, 11-02-2007 12:54:51  
Sounds like you have a 10 SI Delco alternator fitted to your tractor and all wiring is correct. Check that you do have Battery voltage to the big BAT terminal on the alternator rear and to the #2 regulator plug terminal, the one that also goes to the big BAT stud. The gen light uses the #1 regulator terminal on the alternator as a ground to make the light come on and supplys voltage to "excite" the alternator at the same time to get it charging. Some alternator regulators that are a little off spec will excite and charge on an alternator test machine that supplys more current to the #1 alternator regulator terminal, while this same regulator will not work with the tiny fraction of an amp supplied by your little "idiot light bulb.
As a test, carefully touch a jumper wire from the big BAT stud to the #1 terminal in the top of the regulator plug with the tractor engine running at 2/3 speed. You only need to do this for a moment,then see if the idiot light goes and stays out. If this makes the alternator charge and the idiot light goes out, You need a new regulator that is a bit more sensitive, or you need a higher wattage bulb in the idiot light, or add another idiot light wired in parallel with the original to feed more "excite" power to the alternator. This "hidden" idiot light can just be taped to the harness under the cowl. GM cars had the one visible and one hidden idiot light as standard equipment for years. It about drove many mechanics crazy,trying to find out why the alternator was slow or unable to excite until they realized that the visible light was working, but the "hidden" one was burned out.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy