Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Zeneth Carb Kit for Ford 800

Welcome Guest, Log in or Register
Author 
Piney

10-29-2007 09:43:25




Report to Moderator

Greetings--
Can someone help me to ID the Zeneth carb on my Ford 800 ? I need to get a rebuild kit. There is supposed to be a brass tag with the model # on the carb.... but of course-- none there.

It uses rods to operate the mechanics.

The problem Im trying to solve is that he engine will run for 3-5 minutes just fine, then stop. After it sets for a minute or so, it will start up again just fine, then dia-- over and over. Holding the choke out occasionally keeps it running a bit longer-- just long enuf to get it back in the barn sometimes ! Removing the sedimant bowl lets gas pour out-- so the feed line/valve doesnt appear to be clogged.

[Log in to Reply]   [No Email]
soundguy

10-29-2007 09:53:25




Report to Moderator
 Re: Zeneth Carb Kit for Ford 800 in reply to Piney, 10-29-2007 09:43:25  
Does the carb have a drain plug? if so check it to see if the carb has gas init when it dies.

This site sells 2 zenith carbs for the 800 series.. any chance it is one of them?

Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 600, 700, 800 & 900 series tractors using Marvel Schebler TSX692, TSX577 or TSX551 carburetors. Replaces the following OEM part numbers: EBD9510D, 310746, EBE9510D. Center to center on the 2 mounting bolts is 2 516 inches. Made in USA, 1 year warranty. (Part No: 12566) $196.32 [Enlarge Picture]

----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- -- Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 800 series, 900 series tractors 1955-1957 with 172ci gas engine. This Zenith carb replaces Marvel-Schebler TSX706 (supersedes TSX593) and Ford EAF9510G. Center to center on the 2 mounting bolts is 2 38 inches. Made in USA, 1 year warranty. (Part No: 13877) $168.13


Soundguy

[Log in to Reply]  [No Email]
old

10-29-2007 09:52:12




Report to Moderator
 Re: Zeneth Carb Kit for Ford 800 in reply to Piney, 10-29-2007 09:43:25  
Tags on carbs are on the back side so you have to remove the carb from the tractor to see the tag. Pull the drain plug from the bottom of the carb and see if you get a good steady flow of gas there. If you do then I would check spark etc. If you don't then yep you have a problem with the carb. Float maybe sticking or the needle is sticking in the seat. If its the needle some times tapping on the side of the carb will free it up and you will be good to go till it happens again. The stock carb that should be on it would be a M-S carb by the way so you have a replacement carb on it at this time

[Log in to Reply]  [No Email]
Piney

11-05-2007 10:27:59




Report to Moderator
 Re: Zeneth Carb Kit for Ford 800 in reply to old, 10-29-2007 09:52:12  
OK-- ID' the carb. Ordered a rebuild kit.

QUESTION- No instructions with the kit. Looks simple enough though. Anyone have any instructions or suggestions ?



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy