Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

head bolts for an 860 Ford tractor

Welcome Guest, Log in or Register
Author 
alan bane

10-28-2007 13:13:36




Report to Moderator

Does the 860 Ford have 7/16 or 1/2 inch head bolts or does some have 7/16 and others have 1/2 inch bolts. NAPa told me that it takes a 7/16 and I was going to order a head gasket and it asked if it had 7/16 or 1/2 inch head bolts?




[Log in to Reply]   [No Email]
El Toro

10-29-2007 06:04:19




Report to Moderator
 Re: head bolts for an 860 Ford tractor in reply to alan bane, 10-28-2007 13:13:36  
Most 1/2 inch bolts have 3/4 inch hex heads. Hal



[Log in to Reply]  [No Email]
Les Va.

10-28-2007 22:06:08




Report to Moderator
 Re: head bolts for an 860 Ford tractor in reply to alan bane, 10-28-2007 13:13:36  
I just pulled the head off of a 860 4 cyl. gas and it had 1/2" bolts



[Log in to Reply]  [No Email]
nhboyd

10-28-2007 15:02:59




Report to Moderator
 Re: head bolts for an 860 Ford tractor in reply to alan bane, 10-28-2007 13:13:36  
New holland parts shows it has 1/2 in. to be sure take a look at the ones in your engine.



[Log in to Reply]  [No Email]
alan bane

10-29-2007 07:15:58




Report to Moderator
 Re: head bolts for an 860 Ford tractor in reply to nhboyd, 10-28-2007 15:02:59  
The reason I asked was that this site sells two different head gaskets for the 800 series Ford tractor,one for 1/2 and another for 7/16 bolts. A little confusing.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy