Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

power block pistons for JD 60

Welcome Guest, Log in or Register
Author 
wukie

10-25-2007 14:46:03




Report to Moderator

i was just wondering if anyone had some pistons for a 6-3 power block... or if they know where a guy could get some that were in good shape. and maybe the cost of them?




[Log in to Reply]   [No Email]
Drew

10-26-2007 10:55:57




Report to Moderator
 Re: power block pistons for JD 60 in reply to wukie, 10-25-2007 14:46:03  
I think my dad may have a pair that are still in usable shape. I will ask him if he wants to sell them or not.

When looking at used power block pistons, pay special attention to the ring grooves. MANY of the power block pistons I have seen have worn out, sloppy ring grooves. You can have the grooves fixed, but it will probably cost you as much or more than you would pay for used pistons to fix them.

Measure your bore carfully as well, as more than likely it is worn. There is no sense in putting different pistons in a worn out bore.

[Log in to Reply]  [No Email]
mjjk

10-25-2007 19:54:09




Report to Moderator
 Re: power block pistons for JD 60 in reply to wukie, 10-25-2007 14:46:03  
I have a set of 6.125" pistons that will fit in there if you bore it out. I did this about 8 years ago to mine and all i did was tractor pull with it. You can use the same rods and crank. E-mail me for more info, Thanks



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy