Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

carb rebuild

Welcome Guest, Log in or Register
Author 
eeeeeeeeeeeeeee

10-07-2007 14:18:21




Report to Moderator

I need to know all the info I can possibly have on rebuild rebuilding a tsx 120 on an Oliver 60. Like any good solvents to use, the best way to get jets out.ETC.

THANKS , Rob




[Log in to Reply]   [No Email]
Walt Davies

10-08-2007 09:18:13




Report to Moderator
 Re: carb rebuild in reply to eeeeeeeeeeeeeee, 10-07-2007 14:18:21  
Go to any parts house and ask for can of carb cleaner get one that your carb will fit in. then take all about and soak it according to the directions. then wash it off with hot water.
I regrind my screw driver so that they have good sharp edges nice and straight. They will then grab the edges of the brass jets and you can remove them without damage. Make sure that you buy a good rebuild kit that has everything you need in it. the cheap ones are just that cheap.
Walt

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy