Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Farmall 460 Engine Modifications

Welcome Guest, Log in or Register
Author 
W. D. Burgess

09-10-2007 11:11:29




Report to Moderator

Does anyone know if the 221 cubic inch 460 Farmall engine can be made a 301? It seems that you could remove the sleeves and bore the cylinders for the 301 pistons.Has anyone ever done this before?




[Log in to Reply]   [No Email]
ejr-IA.

09-10-2007 13:32:58




Report to Moderator
 Re: Farmall 460 Engine Modifications in reply to W. D. Burgess, 09-10-2007 11:11:29  
You will need a crank and rods from a 560 and 301 pistons.You didn't say gas or diesel just pull the sleeves and hone for stock bore 301 pistons or bore for over sized 301 pistons.Will need some type of ring to fill the top flange area.



[Log in to Reply]  [No Email]
W. D. Burgess

09-11-2007 06:39:32




Report to Moderator
 Re: Farmall 460 Engine Modifications in reply to ejr-IA., 09-10-2007 13:32:58  
Thanks a lot ejr-IA. This is the exact information I was looking for! Thanks again for your help.

Bill in Va.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy