Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Papec Silage Chopper

Welcome Guest, Log in or Register
Author 
Williams Road

09-03-2007 04:55:40




Report to Moderator

I have a Papec Chopper and need two sprockets. One drives the slip clutch, the other is half of that slip clutch. Any one have parts for this old machine?




[Log in to Reply]   [No Email]
Williams Road

09-03-2007 20:14:18




Report to Moderator
 Re: Papec Silage Chopper in reply to Williams Road, 09-03-2007 04:55:40  
I know of a machine shop that should be able to put a new sprocket on these. They both fit on a 1" shaft that is keyed. Thanks for the help.



[Log in to Reply]  [No Email]
Don-Wi

09-03-2007 09:45:27




Report to Moderator
 Re: Papec Silage Chopper in reply to Williams Road, 09-03-2007 04:55:40  
What kind of shaft do they mount on? do you have the originals? If you've got the originals and they mnount on a spline, have a machine shop cut the hub off and weld on a new one. If they just mount to a keyed or pin-holes shaft, get a completely new one made. I used to do that at my previous job every day for farmers.

Donovan from Wisconsin



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy