Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Hey John Hagen(cam info)

Welcome Guest, Log in or Register
Author 
Jak

05-29-2007 11:22:24




Report to Moderator

I thank you for listing the website,I just hope they make one for the M block/400.We'll give it a shot.Were .060 over with new pistons and all new seats,valves,springs,and heads shaved .030.We had to go with the original type piston with the ring around the top unless we bought some Keith Black or Aries type pistons or had Wiseco make us some,$$$$$$$$.Were hoping that she doesen't need 93 octane.

[Log in to Reply]   [No Email]
Jon Hagen

05-29-2007 14:53:06




Report to Moderator
 Re: Hey John Hagen(cam info) in reply to Jak, 05-29-2007 11:22:24  
Sounds like a fun project Jak. I have seen a few cases where a bit too much cam gives a mean street idle and bleeds off enough low rpm cylinder pressure to allow a premium fuel only engine like my last Boss 351 to run on low octane gas. You lose a bit of low rpm torque, but atleast it does not detonate like mad if you lug it a bit.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy