Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

International 444

Welcome Guest, Log in or Register
Author 
Terry Smith

05-25-2007 20:11:16




Report to Moderator

Anyone know the point and plug gap on a international 444




[Log in to Reply]   [No Email]
Terry Smith

05-28-2007 15:54:55




Report to Moderator
 Re: International 444 in reply to Terry Smith, 05-25-2007 20:11:16  
Thanks for the information Johndear. I completely went through the ignition system today including a new coil and resistor. The engine sounds good but the carberator is set a little to rich, I am getting blue smoke and unburnt exhaust fumes, do you have any wisdom you can share about adjusting the carb?



[Log in to Reply]  [No Email]
johndear

05-25-2007 20:55:49




Report to Moderator
 Re: International 444 in reply to Terry Smith, 05-25-2007 20:11:16  
.015" point, .035" plug unless it has a hotter coil than normal and then you might get away with .050".



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy