TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Talk Discussion Forum

Grease Buster update

Welcome Guest, Log in or Register

Author

two mile

05-02-2007 14:22:59

Report to Moderator

Still not done, but the kids got off the bus so I thought I would let you know how my day is turning out. After reading your replies I thought I might try out a Grease Buster. Went to town, stopped at three tool stores. Nobody had one, but last stop did an internet search. So with phone number in hand I returned home to call the company. Turns out that the device is made near Dayton Oh. So I thought what the heck, we'll just drive down there and buy one. On the way I would be passing a dealer that has a lot of unusual items so I decided to stop and see if they had one. They did! That saved a couple hours and a lot of gas.
Bought one. Brought it home and put it to work. Yesterday, when I started to grease our 750 drill, two zerks on every row would not take grease. Thats 48 zerks that were going to need attention. After taking out 12 of them and cleaning out the hole, one still would not take any grease. That was when we knew we had to buy this new tool. It worked! The next 12 zerks required various levels of attention, but each of them took grease with less effort than the first 12. I should have the last 24 done before supper. Sorry for the long post but thought that some of you may like to know. Just for your information and to save someone else the headache, Deere says that those pivots need grease every 50 hours. I took that literally and translated that to every 500 acres. Since I plant about 250 acres per year I thought I would be fine to not grease it last year. WRONG!!.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy