TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Talk Discussion Forum

terratrac gt 34 carburetor

Welcome Guest, Log in or Register

Author

Charles R Wille

03-18-2007 13:51:24

Report to Moderator

I have a american tractor corp. gt-34 with a contenental engine, can anyone tell me what kind of caburetor it takes, it has a carb that is wrong, the engine runs but has no power, thanks

[Log in to Reply] [No Email]

Charles R Willett

03-19-2007 14:47:17

Report to Moderator

Re: terratrac gt 34 carburetor in reply to Charles R Willett, 03-18-2007 13:51:24

I found the engine #171808,chasis#34 518 carb #zenith 143742m91. thanks for all your help, this computer is hard for me

[Log in to Reply] [No Email]

Glen in TX

03-18-2007 17:49:06

Report to Moderator

Re: terratrac gt 34 carburetor in reply to Charles R Willett, 03-18-2007 13:51:24

See if there is a number stamped on a tag or upper carb body itself someplace. If Marvel Schebler carb should be a TSX with 3 digits following. More specifics on year and series of F162 to still tell for sure as the F162 was used on LOTS of applications so with different linkages and all about 50 or more carbs counting Zenith also used on just a F162. MS/Zentith catalogs do list Case and Terratrac and American Tractor but not a GT34 not a F162 specific to it. Find the numbers and we can tell you if was not used on a F162 or whatever engine is in it.

[Log in to Reply] [No Email]

J Schwiebert

03-18-2007 15:02:28

Report to Moderator

Re: terratrac gt 34 carburetor in reply to Charles R Willett, 03-18-2007 13:51:24

For as many different F-162 applications as there were perhaps if you can find a tag on the Carb It will round about the size of a nickel if it is a M-S built unit. Then we can cross it over and tell you what else will work. Have you checked your timing, compression,etc? Does it run better with the choke on somewhat?

[Log in to Reply] [No Email]

george md

03-18-2007 14:39:34

Report to Moderator

Re: terratrac gt 34 carburetor in reply to Charles R Willett, 03-18-2007 13:51:24

Charles,

That should have an F 162 cont'l engine.

You might want to go to the case terratrac

group on yahoo , could be someone there with

a carb.

>Link

>Link george

[Log in to Reply] [No Email]

pat sublett

03-18-2007 14:22:32

Report to Moderator

Re: terratrac gt 34 carburetor in reply to Charles R Willett, 03-18-2007 13:51:24

Check the engine model, if it is a Z134, It's the engine a lot of Fergusons and early Massey Fergusons had. Are you sure the main jet is not stopped up?

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy