Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Power of an 8400 deere

Welcome Guest, Log in or Register
Author 
cranky old fart

01-29-2007 10:52:12




Report to Moderator

How big of a field cultivator can I pull with an 8400 MFWD Deere with weights and rear duals?




[Log in to Reply]   [No Email]
buickanddeere

01-29-2007 14:42:43




Report to Moderator
 Re: Power of an 8400 deere in reply to cranky old fart, 01-29-2007 10:52:12  
200ft wide if run shallow.



[Log in to Reply]  [No Email]
Oliver1850dsl

01-29-2007 11:48:45




Report to Moderator
 Re: Power of an 8400 deere in reply to cranky old fart, 01-29-2007 10:52:12  
We pull a John Deere 722 25 ft disk finisher and 26 ft x-fold packer in tandem over hilly hard northern Indiana Clay with a 8400 and you don"t even know its back there. We are running 4 inches deep over bean stubble to prep for corn



[Log in to Reply]  [No Email]
WELL !!!!!

01-29-2007 11:21:32




Report to Moderator
 Re: Power of an 8400 deere in reply to cranky old fart, 01-29-2007 10:52:12  
Flat or hills,,9inch spacing or 6,,,how deep,,with harrow,,,sandy or hard ground,,had an 8300 with a 33 footer 9inch space,,didnt even know it was back there,hard ground in the hills,,



[Log in to Reply]  [No Email]
massey333

01-29-2007 11:20:15




Report to Moderator
 Re: Power of an 8400 deere in reply to cranky old fart, 01-29-2007 10:52:12  
Depending on ground conditions 40-50 Ft.easy



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy