TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Talk Discussion Forum

JD 2755 Hy Capacity Clutch

Welcome Guest, Log in or Register

Author

R. John Johnson

01-20-2007 08:15:33

Report to Moderator

My cousin has had the tractor apart and the rebuilder said both flywheel and clutch were wore past the point of rebuilding. The new flywheel is from A+I and the new clutch from Hy Capacity. Anyone have any experience with Hy Capacity clutches in that series of tractors?

John

[Log in to Reply] [No Email]

RodInNS

01-20-2007 14:05:41

Report to Moderator

Re: JD 2755 Hy Capacity Clutch in reply to R. John Johnson, 01-20-2007 08:15:33

John,

Dunno about the Deere stuff, but I've used hy-cap on Massey imports and my Ford's, and no trouble so far. It seems to be a pretty good line of stuff. Another one you can look at would be central east farm supply. I've gotten clutches from them in the past at a considerable saving, with the Borg & Beck stamp, the same as OEM.... Only thing is, ya gotta watch the prices because sometimes they're more money than OEM... and sometimes they're a lot less. Worth a look, and I'd have no concern over either of these aftermarket suppliers.

BTW, if you've only done 3 clutches in 20000 hours, there's no shame in any of them. 3500 hours is often about the service life of most dry clutches on loader tractors.... Good luck.

Rod

[Log in to Reply] [No Email]

R. John Johnson

01-20-2007 15:53:45

Report to Moderator

Re: JD 2755 Hy Capacity Clutch in reply to RodInNS, 01-20-2007 14:05:41

Rod

Dad bought the tractor used about 13 years ago. The 3 clutches are since I became re involved with the farm in '98. Don't know how many hours between clutches.

John

[Log in to Reply] [No Email]

ben brown

01-20-2007 10:17:22

Report to Moderator

Re: JD 2755 Hy Capacity Clutch in reply to R. John Johnson, 01-20-2007 08:15:33

hy- capacity is a good as clutch as you can by will have same warenty as jd. most fly wheel can be re-ground several time before having to be replaced. also remember the releas bearing is a hy=internal slave cly. so its need to be replaced last time i did one i got the bearing and slave cly cheaper at jd then hi-cap.

[Log in to Reply] [No Email]

R. John Johnson

01-20-2007 12:34:18

Report to Moderator

Re: JD 2755 Hy Capacity Clutch in reply to ben brown, 01-20-2007 10:17:22

Ben

This is at LEAST the third clutch that has gone into this tractor. It spends most of its time under a loader and shows over 20,000 hours on the tach.

John

[Log in to Reply] [No Email]

ben brown

01-20-2007 14:06:40

Report to Moderator

Re: JD 2755 Hy Capacity Clutch in reply to R. John Johnson, 01-20-2007 12:34:18

then if it been re=ground that maney time it probley need a fly wheel

[Log in to Reply] [No Email]

JDknut

01-20-2007 09:25:16

Report to Moderator

Re: JD 2755 Hy Capacity Clutch in reply to R. John Johnson, 01-20-2007 08:15:33

I put a new clutch in a 2350 MFWD a few years ago, but it was a Luk. I never heard of Hy-Capacity. Sounds like maybe it's an el-cheapo aftermarket, especially if it is wore out already. I wouldnt go with anything except OEM or a top brand aftermarket.

[Log in to Reply] [No Email]

Bob

01-20-2007 10:17:42

Report to Moderator

Re: JD 2755 Hy Capacity Clutch in reply to JDknut, 01-20-2007 09:25:16

Hy-Capacity IS a top-brand aftermarket supplier!

http://www.hy-capacity.com/index.cfm

[Log in to Reply] [No Email]

Ross

01-20-2007 10:09:23

Report to Moderator

Re: JD 2755 Hy Capacity Clutch in reply to JDknut, 01-20-2007 09:25:16

Don't know about John Deere's but I've only heard good things about Hy-Capacity's IH parts especially their TA's. I wouldn't hesitate to use them.
Ross

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy