Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

4020 drawbar support

Welcome Guest, Log in or Register
Author 
nickg

12-10-2006 16:48:07




Report to Moderator

I have a 67 4020. My drawbar support seals are leaking and decided to replace them. I am having trouble trying to get the retainers outso I can get to the pin that goes threw the tractor.




[Log in to Reply]   [No Email]
Mike M

12-11-2006 08:14:35




Report to Moderator
 Re: 4020 drawbar support in reply to nickg, 12-10-2006 16:48:07  
Before you go any farther get yourself some of those aftermarket bushings ( maybe you have them now ) with the o-ring built in them and may as well figure on a new shaft too and get a shim kit to get rid of all the side play. This way you shouldn't have to redo it.



[Log in to Reply]  [No Email]
msb

12-10-2006 19:08:18




Report to Moderator
 Re: 4020 drawbar support in reply to nickg, 12-10-2006 16:48:07  
If you have removed the two small bolts that hold the plugs in then you should be able to pop them out with a couple of large screwdrivers.You have drained the transmission, haven't you?



[Log in to Reply]  [No Email]
nickg

12-11-2006 17:19:45




Report to Moderator
 Re: 4020 drawbar support in reply to msb, 12-10-2006 19:08:18  
drained the fluid 1st thing. It was time to change it and the filter as well. Thats what fueled this maddness. I tried 2 of my flat punches may be I am just not holding my tongue wright.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy