Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

NEED HELP

Welcome Guest, Log in or Register
Author 
Dennis in Wisco

12-02-2006 07:17:55




Report to Moderator

Just got a case uni loader 1737 (very old an wore out) and can*t tell for sure where to add hydraulic fluid ---- called case and they said outside left panel two square plugs in front of the rear tire and fill top plug till full --- this unit has one plug in middle of tire --- poked a wire down the hole to try an get fluid on it but got nothing --- can anyone tell me if this is the correct check point thanks so much Dennis

[Log in to Reply]   [No Email]
JD9295

12-02-2006 15:52:24




Report to Moderator
 Re: NEED HELP in reply to Dennis in Wisconsin, 12-02-2006 07:17:55  
we had the same unit. The hole should be a 3/4 pipe thread for the filler. I put a 45 on it and left it in.
the hydraulic oil runs in both sides to oil the chains and clutches also, there should be a 1 inch hose under the seat down low that hooks both sides together and feeds the pump.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy