Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

What dose a John deere 1050 need to have so it can

Welcome Guest, Log in or Register
Author 
the kisco kid

10-26-2006 20:43:21




Report to Moderator

i just bought a john deere 1050 with a 60in brush mower and i want to put a loader on it and i want to know if it needs to have remote hydraulics or if some one could send me pics of there tractor and loader to show how it would hook up




[Log in to Reply]   [No Email]
Gene Davis (GA)

10-26-2006 21:16:46




Report to Moderator
 Re: What dose a John deere 1050 need to have so it in reply to the kisco kid, 10-26-2006 20:43:21  
You have to add the selective control valves. I added a loader on my 650 JD, and it was impossible to steer it with the bucket full, so I had to add a power steering kit from John Deere. IT WASN"T CHEAP EITHER. It had all the steering components and the provisions for the hydraulic supply to the loader valves. It taps into the lift housing on my 650 and you add an inside plug and a fitting for pressure oil,and it returns back into the side of the transmission case. I used a modified IH 1050 series loader and it worked well after I added the power steering and used radial automotive front tires instead of the regular ribbed tractor tires that tore up too much ground when you turn loaded. The valves should be with the loader.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy