Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

TO30 1950 Massey

Welcome Guest, Log in or Register
Author 
Stewitup

10-19-2006 11:17:51




Report to Moderator

I bought new parts for PTO replacement and I can not get the old shaft out is there a trick to it?
I removed the engaging fork and removed rear cover bolts but it wont budge!!!!




[Log in to Reply]   [No Email]
Jerry/MT

10-19-2006 19:33:28




Report to Moderator
 Re: TO30 1950 Massey in reply to Stewitup, 10-19-2006 11:17:51  
I hate to tell you this but you shaft might be twisted and won't come out of the hydraulic pump. You usually have to cut the shaft and ytake it out in pieces. Go to the Harry Ferguson Forum and do an archive search. This topic has been discussed there before.



[Log in to Reply]  [No Email]
mn.Chuck

10-19-2006 18:59:29




Report to Moderator
 Re: TO30 1950 Massey in reply to Stewitup, 10-19-2006 11:17:51  
Sounds to me like someone used a "hardening"
gasket cement. If so you may have to heat. It
should loosen though if you carefully tap the
Hsg trying to rotate the cast Hsg. back and
forth. Good luck



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy