Tractor Tinkerin' Day

Piddlin' with this old tractor today.

Got the rugs/padding all pulled out of the cab and am in the process of makin' new pedal boots out of an old 10:00 X 20 truck inner tube.

Had to buy that expensive anchor pin for the center link tho and noticed that someone had put an adaptor from CAT III to CAT II in the business end and locked it in with Locktight. Took me an hour with the power chiesel to get that rascal out of there. :>(

Hardest part is gonna be pullin' that darned seat/frame out of the cab so the new mat will fit right. Darned mat is supposed to lay under the seat frame, on top of the hydraulic console and then run clear up the back wall to the bottom of the rear window.

Must be for sound deadening, I guess. :>(

Allan

..... ....must be nice to have a cab.....

You could take some 1/16" x 1" flat stock and make a hold down frame for that clutch boot.....Don

Darned hold-down retainer is still there around the brake pedals, but the one from the clutch is missing. So is the shield from around the remote/hitch hydraulics and a few retainer bolts here and there.

Think someone got in a bit of a hurry when they re-installed the cab the last time. :>(

Allan