Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Late model Perkins Question. Any Perkins gurus?

Welcome Guest, Log in or Register
Author 
lightningale

09-07-2006 16:03:20




Report to Moderator

I recently aquired a Scat Trak with a bad motor. It has a replacement late model(2003) 400 series 2.2 liter Perkins. Apparently, this motor was run out of oil. This particular motor does not use standard main bearing caps to secure the crank in the block, but rather has "bearing carriers" that clamp around the journals of the crank and then it is installed into the block in similar fashion to a camshaft. Of all of the Internet parts sources, I seem not to see anything listed on this motor. question 1) are just the carriers available as a kit with bearings?
Question 2) the crank appears to be able to be saved by turning journals(minor scoring and little wear)DO they turn these cranks?
question 3) (The obvious one) if a complete crank kit is availalbe who can send me a name of a source? THANKS PEOPLE, Nightningale!

[Log in to Reply]   [No Email]
River bottom farmer

09-07-2006 18:21:19




Report to Moderator
 Re: Late model Perkins Question. Any Perkins gurus in reply to lightningale, 09-07-2006 16:03:20  
Nightingale,Not fimiliar with the Skat trak skid loaders.Ive seen a few but never worked on one.The New holland Lx 565 and the newer version LS 160 both use a 2.2 liter Perkins but it is marketed under a Japanese name.....Ishikawa Jima Shiboura..is the name.I work on alot of the new hollands were i work and i can get the model, spec., and family numbers from it but not 100 % sure they will use the same journals, bearings or crank as they are speced out for several different applications.Let me know if you want the numbers and I will get them for you...RBF

[Log in to Reply]  [No Email]
HDM

09-07-2006 18:25:24




Report to Moderator
 Re: Late model Perkins Question. Any Perkins gurus in reply to River bottom farmer, 09-07-2006 18:21:19  
Hey RBF, you work on New Holland loaders?

Don't mean to jack this thread, but do you mind if I ask you some questions about my LX885 in the future?



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy