TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Talk Discussion Forum

you guys are good.

Welcome Guest, Log in or Register

Author

dafooge

07-30-2006 04:28:40

Report to Moderator

last nite i couldnt leave the new motor alone,,lol,,i went out of did as you said and got oil pumping right off,,,great,,now a couple more questions,,,i am running sae 30 oil non derg,oil,,and what should the brake in time be? i will be running a 5 ft brush hog with this 8, and i am a little concerned about running it right away, with brake in time .also does anyone know where i can get the rod ends that hook to the throttle and the govener,,the spring loaded ends? they want to keep popping off.i need 4 of them. well i will fired the motor up today and keep every one posted,,and thank you all for your fast and informational responce, it helped me so much,,,like i said ( YOU GUYS ARE GOOD),

sincery,dafooge

[Log in to Reply] [No Email]

old

07-30-2006 09:51:22

Report to Moderator

Re: you guys are good. in reply to dafooge, 07-30-2006 04:28:40

I've always been told when brakeing one in you run it like you would if it was broke in other then you don't lug it any and you don't work it real hard. You also don't hold it just at one point on the trottle you varie the RPMs a lot. Now as far as those parts I might have some if not all the rods you need in my shop. E-mail is open

Hobby farm

[Log in to Reply] [No Email]

Ken Loewenhagen

07-30-2006 07:04:17

Report to Moderator

Re: you guys are good. in reply to dafooge, 07-30-2006 04:28:40

For the linkage parts, you can check out ebay under 8N. There are ususally some of these parts listed there. Also, try the Fordson House. As far as breaking in the engine, use it at partial load for 10 to 15 hours and then it should be ready for normal work.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy