Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Farmall 400 governor

Welcome Guest, Log in or Register
Author 
Cougah

07-24-2006 09:17:29




Report to Moderator

My Farmall 400 has always run sweet, but recently the throttle control started to feel a bit stiff. Now the old girl won"t start, it sputters a bit and dies, and the throttle is now totally loose. I pulled the side cover off the governor thinking I"d find that the governor spring was broken, but it"s fine, and all the linkage seems to work fine up into elbow above the governor. I hesitate to take anything more appart as I fear stuff might just sprong out at me. Any thoughts or ideas?
Thanks.
Duke

[Log in to Reply]   [No Email]
RustyFarmall

07-24-2006 09:25:40




Report to Moderator
 Re: Farmall 400 governor in reply to Cougah, 07-24-2006 09:17:29  
I'm kinda just guessing but I think you need to remove the tube and shaft from the governor to the carb. and see if all is OK there. If that checks out, take a good look at the actual throttle shaft in the carb.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy