Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

farmall 806 1-4 lever not shifting

Welcome Guest, Log in or Register
Author 
timjsch

05-29-2006 08:06:45




Report to Moderator

My 806 is in first gear and the roll pin came out on the bottom rod where the shaft goes into the leakage. Does anyone know if there is a certain plate I can take off to push this rod back up to reconnect?




[Log in to Reply]   [No Email]
bshannon

05-29-2006 09:31:02




Report to Moderator
 Re: farmall 806 1-4 lever not shifting in reply to timjsch, 05-29-2006 08:06:45  
This has happened to us a couple times, as I recall you have to reach up underneath, it helps to take the sheet metal off around the dash area and also to have a couple extra hands.



[Log in to Reply]  [No Email]
bshannon

05-31-2006 14:56:48




Report to Moderator
 Re: farmall 806 1-4 lever not shifting in reply to bshannon, 05-29-2006 09:31:02  
Thanks, I have gotten in to the tractor by taking the tin off to see what was causing the problem. I need to know if a plate comes off the tractor somewhere to push the rod up into the linkage to put the roll pin back in.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy