Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

ih 1456 remote hydraulics

Welcome Guest, Log in or Register
Author 
Ryan Hansen

02-14-2006 13:06:29




Report to Moderator

Is there any way to add another set of remote hydraulics to a IH 1456? I have dual hydraulics currently. i'm going to put a loader on it and it would be handy not to take my loader off if i was to hook onto another peice of equipment. I seen a set of aftermarket ones on a 806 so they had 4 sets of remotes but i didn't pay attention to how they did it. thanks Ryan




[Log in to Reply]   [No Email]
Ron 1456

02-14-2006 15:09:29




Report to Moderator
 Re: ih 1456 remote hydraulics in reply to Ryan Hansen, 02-14-2006 13:06:29  
In addition to the 2 previously mentioned ways you can also add a power beyond end cap to the second valve if your tractor has a second valve with an end cap. Some tractors used a second valve without an end cap. If yours has this type of second valve you would have to replace it with a valve like the first one. In theory it is posible to stack the valves and use as many valves as you want but you run into problems with operating the valves and doing the plumbing away from them. If you can get access to a parts book it will help you a lot.

[Log in to Reply]  [No Email]
IaGary

02-14-2006 14:04:40




Report to Moderator
 Re: ih 1456 remote hydraulics in reply to Ryan Hansen, 02-14-2006 13:06:29  
I beleive you can do this one of two ways. You can buy a splitter valve that just plugs into one set that you already have and has two sets of couplers coming off of it.It has electric selinoids to switch from one to the other using the same lever to run both sides.The switch determines which ports will activate.

Or you can stack another valve block on the tractor and add another lever.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy