Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Coupleing a hyd pump to an Oliver 60

Welcome Guest, Log in or Register
Author 
old

01-09-2006 12:08:51




Report to Moderator

Has any body ever put a hdy pump on the front of an Oliver 60 and if so how did you do it. Is there a pulley you can buy/make to hok up a front mount pump to a Oliver 60 engine?? Thanks




[Log in to Reply]   [No Email]
JMS/MN

01-09-2006 13:35:26




Report to Moderator
 Re: Coupleing a hyd pump to an Oliver 60 in reply to old, 01-09-2006 12:08:51  
Seem to remember a post a while back about someone using an Oliver pulley on a WD- if that's the case, the reverse should work; maybe WD and D17 shafts are different diameter, but the Series II and III D17 front pulley was machined and tapped with 2-4 holes to mount a pump drive shaft bracket. Otherwise, similar machining and tapping should work on the Oliver pulley. On my reversed WD I just welded in a 3/4 inch stub shaft, machined it for double roller chain sprocket.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy