Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Ford 5610 Fuel Injection Pump Timing

Welcome Guest, Log in or Register
Author 
Brad Root

05-16-2005 23:39:19




Report to Moderator

We just replaced the short block on a Ford 5610 (4cyl, 256) engine. It runs idles great and runs well, but as you rev up the engine is becomes obvious that the timing is slightly off. Short of purchasing a service manual for $200, we have not been able to find the procedure for timing this fuel injection pump (rotary style, outside throttle). Any suggestions?

Thanks!
-Brad




[Log in to Reply]   [No Email]
Jerry/MT

05-17-2005 10:01:06




Report to Moderator
 Re: Ford 5610 Fuel Injection Pump Timing in reply to Brad Root, 05-16-2005 23:39:19  
Yeah, buy the factory manual or get the cheaper IT manual if it has the instructions in it. It takes some special tools to time the pump. You might consider taking it in to a place that works on injection pumps and maybe they can do it for you for less than the manuals and the special tools.
There is a note in my manaual that says that to account for backlash in the timing gears, you should rotate "the pump 1/2 division clockwise(as viewed from the rear of the pump) relative to the zero degree mark on the rear of the engine front plate." You might try this and see if it improves the situation.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy