Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

how to check injectors?

Welcome Guest, Log in or Register
Author 
vabill

03-22-2005 13:04:46




Report to Moderator

hi, i finally got a new head for my case/ih 385 3 cyl, diesel, 35 hp. i ground the valves & installed them & i installed the head today. is there a way to check the injectors before i install them? thanks bill




[Log in to Reply]   [No Email]
MSM

03-22-2005 15:27:20




Report to Moderator
 Re: how to check injectors? in reply to vabill, 03-22-2005 13:04:46  
Easiest way is to take them to an injector shop and have them tested. They can check spray pattern,cracking pressure,and make any minor adjustments that may be needed. The shop I use only charges $5. ea. to check them,considerably cheaper than buying an injector tester for a one time use. When you did your valves did you check the set out dimension? If you just ground them and the seats,you may have a hard start problem, or low speed miss caused by the valves being sunk down in the head too far.

[Log in to Reply]  [No Email]
vabill

03-23-2005 09:45:04




Report to Moderator
 Re: how to check injectors? in reply to MSM, 03-22-2005 15:27:20  
thanks for the reply. i didnt grind the valves, had someone do it for me. going to check around for a shop to check out the injectors. thanks again. bill



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy