Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

oliver 77 intake and carburetor

Welcome Guest, Log in or Register
Author 
monte sheets

01-25-2005 21:05:42




Report to Moderator

would like to know if the intake and carburetor of a later series oliver will fit that is bigger for more fuel and air?




[Log in to Reply]   [No Email]
770

01-26-2005 18:11:05




Report to Moderator
 Re: oliver 77 intake and carburetor in reply to monte sheets, 01-25-2005 21:05:42  
Yes it will. On one of my 77"s I put the intake from a 770 on along with the TSX 755 carb. A TSX 374 from a super will also fit. The 77 should have on the TSX 363. I"ve had good results with the 770 set up. On that tractor though, I had the head ported and polished..(a puller). Just remember, the ports on the 77 head are smaller than the super or 770 head. As info, the 1550 carb will also bolt up, a TSX 903....But they are harder to find. Don"t over fuel your tractor, I"d recommend if going to a larger carb, a larger intake is a must. Will probably be good for a few more horse. Good luck...Just my opinion....

[Log in to Reply]  [No Email]
oliver power

01-26-2005 04:37:51




Report to Moderator
 Re: oliver 77 intake and carburetor in reply to monte sheets, 01-25-2005 21:05:42  
Yes. the super 77 , and the 770 will fit on a 77. The 1550 may even fit , but don"t know for sure.



[Log in to Reply]  [No Email]
old

01-25-2005 21:30:26




Report to Moderator
 Re: oliver 77 intake and carburetor in reply to monte sheets, 01-25-2005 21:05:42  
Check with the Oliver forum I think one from a 770 will but I'm not sure



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy