Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Allis-Chalmers B

Welcome Guest, Log in or Register
Author 
Mike10

12-31-2004 13:57:18




Report to Moderator

What size can the crankshaft be until I need to put .010 over size mainbearings in.




[Log in to Reply]   [No Email]
lucass

12-31-2004 17:19:59




Report to Moderator
 Re: Allis-Chalmers B in reply to Mike10, 12-31-2004 13:57:18  
if your crank is std .you cant put 010 bearings in untill you have the crank reground to .010 .if you have the allis engine you can get .002 under rod bearings though you may use if worn about .002.if you have the b with the hercules engine you will have to have it reground to fit brgs.hercules used a main set with the flange brg on the rear main and a main set with thrust washer on # 4 or #7 main..the nice thing about the brgs set with thrust washers is you can get the washers oversize....lucass

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy