Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

300 utility 12 volt conversion

Welcome Guest, Log in or Register
Author 
albert boulais

09-14-2004 15:01:42




Report to Moderator

I am finished playing with 6 volt system any info on a kit or possably an altenator with the right shaft size that i can put the origional ajustable pully on so i dont have to modife the skin ?




[Log in to Reply]   [No Email]
300 Randy

09-15-2004 07:13:27




Report to Moderator
 Re: 300 utility 12 volt conversion in reply to albert boulais, 09-14-2004 15:01:42  
Buy a small GM alternator at a bone yard. It bolted right up to the generator bracket on my 300. The only thing I had to do was remove the sheetmetal brace under the hood piece as it was hitting it. Good luck



[Log in to Reply]  [No Email]
TheRealRon

09-15-2004 05:23:53




Report to Moderator
 Re: 300 utility 12 volt conversion in reply to albert boulais, 09-14-2004 15:01:42  
Delco alternators use many different size pulleys. You can even buy aftermarket pulleys. On a tractor, it's fine to use a smaller pulley. Check an auto parts store or junkyard. Delco 10Si alternators are a dime a dozen. Don't know if your pulley will fit but it's easy to find out.

There's an article on this site on how to convert to 12v if you need it.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy