Kubota L-245

I'm still not sure about your head bolt torques because "m not sure which engine you have. The valve adjustments are 0.007" - 0.008" on both. The rocker arm support bolts/nuts are 12-15 lb-ft. The head bolts can range from 48 - 72 lb-ft depending on model number. If you can get me that I will more than happy to look them up for you on Monday (off till then). The engine number will be adjacent to the injection pump on a machined pad and will be DXXXX-XXXXX; the D is for a 3 cylinder engine. I think its an 1102 or 1302 engine but lets be sure. E-mail me directly if you want. Common mistake on Kubotas; be sure to install a new O-ring on the oil nozzle on top of the block at the left front. If you leave it out, it will leak!

Tommy

If I'm not mistaken, that's the D1102 engine in the L-245. I work at a Kubota engine dealer; I can get the torques tommorrow (the 22nd) if that's soon enough. I will post back to the thread.

Tommy