Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

3pt to PTO

Welcome Guest, Log in or Register
Author 
INCase

06-30-2004 13:32:48




Report to Moderator

I've seen lots of info on the dimensions for 3pt systems. I didn't see anything though with the dimensions from the 3pt (say lower arms) to the centerline of the PTO shaft. Does anyone have that info? THanks




[Log in to Reply]   [No Email]
JMS/MN

06-30-2004 16:50:53




Report to Moderator
 Re: 3pt to PTO in reply to INCase, 06-30-2004 13:32:48  
3ph specs are at www.asae.org.



[Log in to Reply]  [No Email]
Ron

06-30-2004 15:31:01




Report to Moderator
 Re: 3pt to PTO in reply to INCase, 06-30-2004 13:32:48  
3 pt. dimensions vary by category. PTO is in the middle.



[Log in to Reply]  [No Email]
Steve(OR)

06-30-2004 16:10:48




Report to Moderator
 Re: Re: 3pt to PTO in reply to Ron, 06-30-2004 15:31:01  
So right - my implements arwe all cat 1.



[Log in to Reply]  [No Email]
Steve(OR)

06-30-2004 14:27:15




Report to Moderator
 Re: 3pt to PTO in reply to INCase, 06-30-2004 13:32:48  
The spread is usually 26", but this is not a hard and fast standard. I have a boom pole that is 24", and a dirt scoop that is 30" (pins mounted on the inside). This makes it difficult to use a pair of stabilizer (anti-sway) bars on every implement. Sometimes I have to use only one.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy