Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

case 310 governor

Welcome Guest, Log in or Register
Author 
Brian

05-06-2004 08:17:32




Report to Moderator

On a 1958 Case 310.

The governor is pulling the butterfly valve on the carburetor full open, engine running or not. The hand throttle does not change the position of the governor lever.

When running, the tractor wants to run at full throttle.

The throttle linkage and linkage to the carburetor are not bound.

Any suggestions…




[Log in to Reply]   [No Email]
Brian

05-06-2004 11:16:28




Report to Moderator
 Re: case 310 governor in reply to Brian, 05-06-2004 08:17:32  
Stan,
thanks for your response,

to clarify:
the governor lever moves by hand with no binding, it's just forcing the carb to full throttle.

Brian



[Log in to Reply]  [No Email]
Stan(PA)

05-06-2004 09:55:34




Report to Moderator
 Re: case 310 governor in reply to Brian, 05-06-2004 08:17:32  
The governer is stuck. Either mechanically bound up, or full of gunk and needs cleaned out. That's my guess anyway.....



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy