Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Ferguson hyd. in-op after a draft spring adjustme

Welcome Guest, Log in or Register
Author 
Rick Hawk

03-05-2004 06:02:34




Report to Moderator

After a pin and weld repair on the draft piviot bracket. I have on operation of the hydrloics.
Any HELP. RICK




[Log in to Reply]   [No Email]
Crem

03-05-2004 22:08:20




Report to Moderator
 Re: Ferguson hyd. in-op after a draft spring adju in reply to Rick Hawk, 03-05-2004 06:02:34  
I don't know which Ferguson that you are referring to, but if it is a TO-20 or 30 I can tell what happened to mine when I tried to adjust the draft spring. The adjusting threads were rusted so that it would not turn. I tried to force it and I snapped off a small stem on the control valve at the bottom of the pump. The fork assembly moved too far because of my twisting effort and snapped the stem which is about 1/16" in diameter. If this is the problem, you have to remove the pump. Possibly it could be welded. I had an extra pump that I installed.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy