Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

806 front end

Welcome Guest, Log in or Register
Author 
cowmansam

02-04-2004 10:59:01




Report to Moderator

I noticed the front end on my 806 farmall is really loose in the center where it connects to main frame. I guess there is bushings or something that are worn out. It also has some wobble on the left side in the wheel and spindle. Would it be cheaper to find another whole axle or rebuild this one?




[Log in to Reply]   [No Email]
E J

02-04-2004 12:25:17




Report to Moderator
 Re: 806 front end in reply to cowmansam, 02-04-2004 10:59:01  
You can buy replacement parts and bushings for your front end theirs after market or through a red dealer .Whats loose the wish bone or the bolster?In the wishbone theirs metal shims that you can take out of the ball socket the bolster you will need a new pin and bushings.I cheated and welded my steering arm to my spindal if it falls apart I"l cut it off wiyh a torch and replace with new.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy