Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

John Deere G gas piston and 70 gas piston

Welcome Guest, Log in or Register
Author 
Old Joe

01-02-2004 16:40:30




Report to Moderator

Can anyone give me the following demensions of a John Deere model G stock gas piston and a stock Model 70 gas piston? 1) Overall from top of piston to bottom of piston
2) Size of wrist pin hole
3) From center of wrist pin hole to top of piston
4) From top of piston to top of top ring
5) From top of piston to bottom of bottom ring 6) If anyone could post a photo of these pistons it would be very helpful
7) Or can anyone tell me where I can find this information as I have no books.

[Log in to Reply]   [No Email]
buickanddeere

01-02-2004 17:24:12




Report to Moderator
 Re: John Deere G gas piston and 70 gas piston in reply to Old Joe, 01-02-2004 16:40:30  
Try the Deere and the pulling area of this site. Factory service manuals from Deere at 1-800-522-7448 have all the specs. Shouldn't be taking it apart or putting it together without knowing the numbers.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy