Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Done Split the 350 Farmall !

Welcome Guest, Log in or Register
Author 
Greasy John-Or

11-01-2003 17:49:32




Report to Moderator

Me again Fellows--well The Landfill 350 is in 2 parts tonite.My grateful Thanks to all who tried to help me. My special Thanks go to Peter at Wisconsin Tract.Parts.who has just bought out Paynesville tract as I understand it. I ordered the new PTO gear and shaft (used) (driven Gear)
but could get the case to split from the tranny Pete sent me 8 sheets of info from the orginal IH manual with the advise to pull very hard I did and it finally busted loose.I built a (I) beamm jig from an old Trailer house tounge and a roller jig for the front half --I can push it back and forth and it stays in alignment.How can one put info in the archives for future users??? John I have jpgs if anyone is interested in this whole operation.

[Log in to Reply]   [No Email]
RJ-AZ

11-01-2003 17:57:17




Report to Moderator
 Re: Done Split the 350 Farmall ! in reply to Greasy John-Or, 11-01-2003 17:49:32  
Glad you got it split. You never know how much pressure to put on something like that. I busted a few things when I was younger and now try not to use the bigger hammer or longer prybar approach.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy