Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

I need advice on how I could get a disc from PA to

Welcome Guest, Log in or Register
Author 
R Wyler

10-02-2003 11:35:36




Report to Moderator

I see a disc that I really want located in PA and I have no way of going up there to get it as I live in north central OK. I have looked at the hauling schedule but cannot really tell if any of them are going in that path between me and PA. Can anyone tell me what approx kind of costs I would be looking at for this? Any help/advice is appriciated. Thanks R Wyler.




[Log in to Reply]   [No Email]
Steve450

10-02-2003 18:45:32




Report to Moderator
 Re: I need advice on how I could get a disc from P in reply to R Wyler, 10-02-2003 11:35:36  
I had a guy from the hauling schedule haul a 2 btm plow from Pa to central Tx last year. The guy that hauled it was moving a tractor on the same path and had room on his trailer. Cost $350.00 to throw it on as an extra to his load, so it may cost more to have a disc hauled. Seemed kind of pricey, but I wasn't paying the bill. I would wait and try to find one localy unless you just have to have this one. My $.02

[Log in to Reply]  [No Email]
R Wyler

10-02-2003 20:21:18




Report to Moderator
 Re: Re: I need advice on how I could get a disc fr in reply to Steve450, 10-02-2003 18:45:32  
Thanks for the information I will wait and look around because it would cost a great deal I am sure like you say. I am sure that haveing something hauled that far would be exspensive. Thanks again. R Wyler.



[Log in to Reply]  [No Email]
Jim.UT

10-02-2003 14:34:14




Report to Moderator
 Re: I need advice on how I could get a disc from P in reply to R Wyler, 10-02-2003 11:35:36  
You can also post on the hauling schedule that you need a disc hauled from PA to OK and maybe someone who is going that direction with room on a trailer will contact you.

I used to know a guy that did stuff like that for a living, but his website is down and he hasn't answered my emails. I guess he quit doing it...maybe he was getting too much hassle from DOT.



[Log in to Reply]  [No Email]
R Wyler

10-02-2003 18:32:21




Report to Moderator
 Re: Re: I need advice on how I could get a disc fr in reply to Jim.UT, 10-02-2003 14:34:14  
Thank's for the followup yes I agree If I do go through with this then I best post what I need in the hauling schedule need hauled ads. Thanks again. R Wyler



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy